Aluminium Lighthouse GRP Lighthouse

Lighted Buoy

Various Aluminium Lighthouse & Beacon

20m Aluminium
Lighthouse Tower
3m Pole Type
Aluminium Beacon
10m Pole Type
Aluminium Beacon
18m Aluminium
Lighthouse Tower
20m Aluminium
Lighthouse Tower

Zeni Lite Technology and long experience of various Aluminium
lighthouse and beacon design

Zeni Lite has extensive experience in manufacturing and supplying the wide range of Lighthouse equipment and related products to many countries.

The structural design and the equipment layout of an individual lighthouse depend on the location and purpose of the aid. Different designs are sometimes needed for landfall lights, coastal lights, and port entry lights.

Rehabilitation or modernization of an existing lighthouse generally requires a high-reliability and low-maintenance system with good energy efficiency.

Zeni Lite can provide the best equipment and can assist with technical and commercial planning.

Zeni Lite is the leading designer and manufacturer of marine aids-to-navigation. Each new enquiry will be studied by our technical Department, and the optimum design proposal prepared. If necessary, our experienced engineers will conduct a site survey.

Aluminium Lighthouse Tower

Modern day lighthouses are generally unmanned, and their designs need to support a host of equipment of varying weights and sizes, from operating optical systems (primary and secondary lights) to monitoring devices, meteorological sensors and other maritime devices. Electronic equipment predominantly needs to be installed within well ventilated weather sealed enclosures to protect the equipment, as well as discourage access by unauthorised persons. The structures have to be designed for long life and are to withstand severe winds of typhoon strength.

Using specialised machinery and tooling available within the Zeniya group, Zeni Lite designed and developed a range of fully enclosed modular lighthouse towers and beacons with working platforms and/or lantern houses from marine grade Aluminium, a material selected based on its strength, light weight, ruggedness and durability.

The modular designs are sectional, fabricated in 5 metre lengths, available from 5 metres up to 30 metres, which are relatively easy to transport to remote sites. Depending on the required structure height, the lighthouse tower cross-sections are either hexagonal for smaller structures or octagonal designs for the larger structures.

Zeni Lite Aluminium towers provide excellent lightning protection, where the external skin acts as a lightning conductor simultaneously shielding all electronics systems within the tower from any surge induced voltages

Assembling Aluminium Lighthouse Tower

Assembling Aluminium Lighthouse Tower
Tower assembly is relatively straightforward and does not require any heavy lifting crane or specialised tools. Assembly is carried out at site using conventional practice. These designs allow for inter-changeability, all of which are critical when working in remote locations.